Quick guide to Neo 7 Adapter
This Quick-Guide can be used in everyday life and contains only the essential operations.
Operating the TV with B&O remote control depends on the make, so read the user manual here.
If you are installing the product for the first time, read this guide – click here
Setting up the stand
Setup for the rotate function for Beovision 7.40 stand (left/right)
MENU 4 0 9 1 GO
The setup for the swivel function for Beovision 7.40 stand (left/right) and the tilt/tilt function (up/down)
MENU 4 0 9 2 GO
Setup for the rotate function for Beovision 7.32 stand (left/right)
MENU 4 0 9 3 GO
Setting the 4 stand positions
Position | Location |
---|---|
0 | Standby position – TV is switched off – when the TV is switched off, the stand goes to position 0 |
1 | When the TV is switched on from stand-by, the stand goes to position 1 |
2 | The user must select position 2 via the remote control |
3 | The user must select position 3 via the remote control |
You set the 4 stand positions like this
Position | Remote control command | Comment |
---|---|---|
Standby position – 0 | STAND | Activates the stand |
LEFT ARROW - RIGHT ARROW - UP ARROW - DOWN ARROW | Sets the stand position and tilt position that the TV will be in when standby (off) is pressed | |
STAND - GREEN BUTTON - 0 | Saves the position with number 0 | |
Switch on position – 1 | STAND | Activates the stand |
LEFT ARROW - RIGHT ARROW - UP ARROW - DOWN ARROW | Sets the stand position and tilt position that the TV will be in when the TV is switched on via the TV button | |
STAND - GREEN BUTTON - 1 | Saves the position with number 1 | |
Own position – 2 | STAND | Activates the stand |
LEFT ARROW - RIGHT ARROW - UP ARROW - DOWN ARROW | Sets the position of the stand and tilting position, as the user's own position 2 | |
STAND - GREEN BUTTON - 2 | Saves the position with number 2 | |
Own position – 3 | STAND | Activates the stand |
LEFT ARROW - RIGHT ARROW - UP ARROW - DOWN ARROW | Sets the position of the stand and tilting position, as the user's own position 3 | |
STAND - GREEN BUTTON - 3 | Saves the position with number 3 |
If Neo 7 Adapter has received your command correctly, you will hear 2 beeps – if an error has occurred, you will hear a long beep.
The desired positions can be selected/activated by pressing
STAND X
Where X is replaced with the desired position – for example, if the user wants to set the stand in position 2, then press
STAND 2
Setting restrictions on the turn and tilt function
In certain cases, it may be necessary to limit the turning and tilting function. It could be, for example, that there is a piece of furniture that the TV will turn towards. This restriction can be done in the following way
Restriction | Remote control command | Comment |
---|---|---|
Right side | STAND | Activates the stand |
RIGHT ARROW | Sets the position of the stand on the right side - position the TV exactly where the restriction should be | |
STAND - GREEN BUTTON - 4 | Saves the boundary for the right side | |
Left side | STAND | Activates the stand |
LEFT ARROW | Sets the position of the stand on the left side - position the TV exactly where the restriction should be | |
STAND - GREEN BUTTON - 5 | Saves the bounds for the left side | |
Down/bottom | STAND | Activates the stand |
ARROW DOWN | Sets the position of the stand at the bottom - position the TV exactly where the restriction should be | |
STAND - GREEN BUTTON - 6 | Saves the border at the bottom | |
Up/the top | STAND | Activates the stand |
ARROW UP | Sets the position of the stand at the top - position the TV exactly where the restriction should be | |
STAND - GREEN BUTTON - 7 | Saves the boundary at the top |
If you regret a restriction, you can delete it by doing the following.
STAND – RED BUTTON – 4
This will delete the restriction on the right side.
You can do the same for the Left side (5), the Bottom (6) or the Top (7).
All stand positions
Stand Position | LIST – Green button |
---|---|
standby | 0 |
TV is on | 1 |
Own position | 2 |
Own position | 3 |
Right constraint | 4 |
Left constraint | 5 |
Down/bottom restriction | 6 |
Up/top limitation | 7 |
Startup sound
The startup sound can be adjusted between 0% (the sound is completely gone) to 100% (the sound is at maximum level). From the factory, the starting level is limited to 20%. This can be changed between 0% and 100%.
Marking:
MENU 3 XXX GO
You must then replace the three XXX with your desired start sound level. You write eg 000 for 0% or 010 for 10% or 030 for 30% sound level.
If you want to set 30% start sound level, press the following
MENU 3 030 GO
Maximum sound
MENU 2 XXX GO
You will subsequently hear 4 short beeps as a response that it went well.
Updating the software on Neo 7 Adapter
Do you need to update the software on Neo 7 Adapter, so read here how