Neo Radio – How to set the FM channel on the B&O product
This NeoGuide tells you how to set your B&O product to FM 90 MHz to receive Internet Radio channels from Neo Radio.
Neo Radio supports more than 10 B&O products – Beomaster, Beosound, Beocenter and Beosystem.
The table below shows the commands to set the FM receiver on the B&O product to 90.0 MHz, so Neo Radio can send the selected Internet Radio channel to the Bang & Olufsen product and out to the Beolab speaker.
It is a good idea to read the manual on the B&O product, which tells in more detail about setting up the pre-defined FM channels. The manuals can be found on the Bang & Olufsen website.
| B&O product | Keyboard on the product | Beolink 1000 | Master Control Panel | Beo4 |
|---|---|---|---|---|
| Beomaster 6500 | RADIO - GOTO - TURN - Display shows 87.5 - GOTO - 900 - PRESET - STORE - 1 - STORE. Same technique for channel 2,3,4, ...) | |||
| Beomaster 7000 | ||||
| Beocenter 8500 | ||||
| Beocenter 9300 | ||||
| Beocenter 9500 | ||||
| Beomaster 4500 | 1 - PROGRAMMING - GOTO - 900 - STORE - 1 STORE. Same technique for channel 2,3,4 ... | |||
| BeoSound Overture | ||||
| Beosystem 2300 | ||||
| Beosystem 2500 | ||||
| Beosound 3000 | RADIO - TUNE - (FM appears in the display) - 900 - PLAY - 1 - STORE - (STORED appears in the display). Same technique for channel 2,3,4 ... | |||
| Beosound 3200 | RADIO - SETUP (until TUNE appears in the display) - GO - 900 - GO - 1 - GO - (STORED appears in the display). Same technique for channel 2,3,4 ... | |||
| Beo Sound 9000 | ||||
| Beosound 4 | RADIO - MENU - SETUP - RADIO - ADD CHANNEL | |||
| Beocenter 2 |
The FM receiver on the B&O product can be set either directly via the device's own keyboard or via a B&O remote control – typically Beolink 1000, Beolink 5000, Beolink 7000, Beo4, Beo5, Beo6 or a Beoremote One.
Unfortunately, the method is not exactly the same on all B&O products, but the technique is the same.