Neo 7 Spacer - Brings your new TV to the front together with Beolab 7
Neo 7 Spacer brings your new TV right to the forefront - as before. Make the front edge of the TV and the Beolab 7 speaker flush so it looks like the Beovision 7.
How it works Neo 7 Spacer
The original Beovision 7 TV from B&O on the Beovision 7.40 stand was flush with the front edge of the Beolab 7 speaker.
Newer TVs are not as deep – like the old Beovision 7 TV – so the front edge of the TV does not line up with the front edge of the speaker. It's a matter of taste.
If you want it as before, so be it Neo 7 Space the solution. Now the front edge of the TV aligns with the front edge of the Beolab 7 speaker.
At the same time, you get a cavity behind the TV - where cables, Apple TV and other TV boxes can be hidden. You get a nice set-up without cable fiddling.
How to apply Neo 7 Spacer on your Beovision 7 stand
Choose the right Spacer product before you can start.
There are 3 parameters that are important before you can start.
The 2 VESA measurements must match your TV. It is the width and height of the VESA measurements of your TV. An example is VESA 300 x 200, which means the distance between the mounting screws in width is 300 mm and 200 mm in height. Check this on your TV.
If you don't already have a VESA plate attached to your TV, you can buy one here.
When the VESA plate is selected and ready, you can make a decision Neo 7 Spacer. The product is available for the various VESA measurements and it must be chosen correctly. After that, you have to choose the depth.
Neo 7 Spacers can be bought in Neo Shop in certain jumps. You can – as an example – move your TV 130 mm forward or 100 mm forward in depth.
Check your own setup. Measure the distance from the front edge of your Beolab 7 speaker to the front edge of your TV. If it is, for example, 135 mm, then choose the nearest product that moves the TV forward.
A guide has been created here to help you choose the right one Neo 7 Spacer brackets. Fill in all the data and you will get help to also choose the right Spacer product.
Step by step – simple and easy on your TV for Beovision 7
We all know it - cables and TV boxes. It is not easy to hide behind the TV. There are many different cables and they are all too long. There is an Apple TV box, a box for the TV provider and much more. How to hide it so the result is nice and simple.
It's easy with that Neo 7 Spacer – hide the installation under the cover plate and you immediately have a simple and beautiful setup.
What is included in the package Neo 7 Spacer
Spacers, cover plate and mounting screws for the VESA plate are included.
Is your TV balanced on the Beovision 7 stand
If you want to be sure that your TV is vertical, use the Neo Tilt Stop